• About Benel
• Advice
• Trade shows
• Dealers
• Service

• +31 528-234828

Falcon Eyes RGB LED Panel RX-7120 III-K1 116x117 cm 680W

Are you looking for a large LED panel that is flexible and has a high light output? Then the RX-7120 III-K1 from Falcon Eyes is the perfect panel. The size is 117x116 cm and the LED panel is only a few millimeters thick. In the RX-7120 III-K1 are no less than 4800 LEDs processed with a total power of 680 watts. The CRI value of 95+ ensures natural colors. A light output of 31,400 lux at half a meter provides more than enough light in many conditions. The light is flicker-free, allowing you to use it for both photos and videos. The adjustable color temperature of 2500K-9999K allows you to perfectly match the RX-7120's light to the ambient light. The full RGB spectrum can be displayed, allowing you to display a color of your choice.

Key features:

• Splash-proof: you can use the panel even near water without fear of water damage
• Different modes: up to 5 different modes are possible on the panel
• Wirelessly controllable: With the Desal Lite+ app, you control the RX-7120 III-K1 and determine the color settings

Mounting the RX-7120 III-K1

You mount the RX-7120 III-K1 on the frame, using the supplied mounting materials. Then you place the panel on a lamp stand (see recommendation in optional accessories). An adapter is included which allows you to adjust the angle of the RX-7120 III-K1 in relation to the tripod.
Steel cables are also included, which you thread through the round openings. This makes it possible to mount the RX-7120 III-K1 to a truss or other construction.

Application RX-7120 III-K1

With the RX-7120 III-K1 you have a versatile and lightweight solution that can be used in many situations. Its impressive size and large amount of LEDs provide more than enough light output. Because the LED panel is flexible, thin and light, it can be placed almost anywhere. For example, against the ceiling of a car during film shoots.

4 different modes

Through the menu you control the RX-7120 III-K1 with four different modes:
- CCT mode: brightness and color temperature (2700K-10,000K)
- RGB mode: set any color (from 0 to 255)
- HSI mode: color hue, saturation and intensity (0 to 100%)
- Theme mode: flashing lights, candlelight, thunderstorm (adjustable speed)

DMX panel connection

The light has a 5-pin XLR connection to connect to a DMX panel. This allows you to control the light based on the DMX512 protocol. The last picture shows this connection.

Included:

• 1x RX-7120 III-K1 panel
• 1x Controller
• 1x Power cable
• 1x Frame for mounting
• 1x Softbox
• 1x Grid
• 1x Spigot adapter (90°)
• 1x Steel cable set (4 pieces à 80cm)
• 1x Transport bag