• About Benel
• Advice
• Trade shows
• Dealers
• Service

• +31 528-234828

Falcon Eyes Flexibel RGB LED Panel RX-818-K1 61x46 cm

This item has been replaced by 290797

The Falcon Eyes RX-818-K1 is a flexible LED panel with many lighting options. In addition to cold and warm light, the RX-818-K1 also offers the complete RGB spectrum. In addition, the lamp can mimic Rosco and Lee filters and show various special effects. For all colours, you can count on the highest quality light, with a CRI value of 95. 560 LEDs provide a total power of 100W. The color temperature varies from 2800K to 10.000K. Besides control with the buttons on the back, you can also control the RX-818-K1 with DMX. The dimensions are 61 x 46 cm.

Flexibility RX-818-K1

The flexible design allows you to bend the RX-818-K1 in any angle and direction. It is even possible to roll the RX-818-K1 into a tube. Mounting on a tripod is possible with the included X-bar. On the back is Velcro for mounting on many surfaces.

Usage RX-818-K1

The RX-818-K1 is indispensable for any creative photographer or cameraman. The lighting possibilities are endless. Adjust the color temperature according to the ambient light or create a colored glow for extra atmosphere. The RX-818-K1 is only 10mm thick and weighs just a few hundred grams, so you can take it wherever you go. The included case provides safe protection. You will receive a cable to connect the RX-818-K1 to a power outlet. Optional V-mount batteries are also available, which you can find in the optional accessories.

Unique features RX-818-K1

• CRI value of 95
• Splashproof
• 2800K-10.000K
• Beam angle 10-360°
• 100W
• 560 LEDs

5 different modes

The RX-818-K1 can be operated in five different modes using the menu and smartphone:

- CCT mode: brightness and colour temperature (2800K-10.000K)
- RGB mode: set any color (from 0 to 255)
- HSI mode: colour tint, saturation and intensity (0 to 100%)
- Filter mode: 20 Rosco filters and 20 Lee filters
- Theme mode: flashing lights, candlelight, thunderstorms (adjustable speed)

RX-818-K1 control

You can control the RX-818-K1 with an iPhone or Android smartphone. Bluetooth 5.0 is used for this purpose. Almost all light settings can be controlled from the RX-818-K1. The iPhone app can be found here. The Android app can be found here. It is also possible to operate the RX-818-K1 using the DMX512 protocol.

Usage RX-818-K1

When working in a studio and looking for a universal light source, the RX-818-K1 is indispensable. In addition to an infinitely adjustable cold and warm light, all the colours of the rainbow can also be set. The brightness is also infinitely adjustable. Furthermore, the RX-818-K1 can imitate the colour of ROSCO and LEE gel filters. There are special modes for the film industry that allow you to simulate police beacons, candlelight and thunderstorms. All are adjustable in tempo and brightness. If there are new features or improvements in the future, it is possible to update the firmware of the RX-818-K1. This is possible with the smartphone app. The RX-818-K1 has a built-in cooling fan, which is very quiet. It also switches on only when needed. At a distance of half a metre, the RX-818-K1 produces a sound of 33.5 dB. If this is undesirable, you can place the controller further away using a special extension cable (see optional accessories).
The extension cables you use with this panel are: SP-XC04HA-8,SP-XC06HA-8,SP-XC08HA-8,SP-XC10HA-8

Included:

• 1x RX-818-K1 LED lamp
• 1x X rod
• 1x Controller with power cable
• 1x Hinge point
• 1x Velcro strap set
• 1x Softbox
• 1x Honeycomb
• 1x Transport case